Galvanized & Coated Products
Designed for superior corrosion resistance, formability, and surface finish, our galvanized coils, sheets, and coated products are trusted across construction, roofing, appliances, and industrial applications.
Coated for Performance, Built for Life.
Specifications
● ASTM A653 / A653M – Hot‑dip galvanized steel sheet (structural & commercial grades)
● ASTM A792 / A792M – Aluminum‑zinc alloy coated steel (Galvalume® type)
● ASTM A875 / A875M – Zinc‑5% aluminum alloy coated steel
● BS EN 10346:2015 – Continuously hot‑dip coated steel flat products (DX, S grades)
● ISO 3575 – Continuously hot‑dip coated steel sheet (commercial & structural)
● ISO 4998 – Continuously hot‑dip zinc‑coated carbon steel sheet
● JIS G3302 – Hot‑dip galvanized steel sheet & coil (SGCC, SGHC, etc.)
● ASTM A792 / A792M – Aluminum‑zinc alloy coated steel (Galvalume® type)
● ASTM A875 / A875M – Zinc‑5% aluminum alloy coated steel
● BS EN 10346:2015 – Continuously hot‑dip coated steel flat products (DX, S grades)
● ISO 3575 – Continuously hot‑dip coated steel sheet (commercial & structural)
● ISO 4998 – Continuously hot‑dip zinc‑coated carbon steel sheet
● JIS G3302 – Hot‑dip galvanized steel sheet & coil (SGCC, SGHC, etc.)
● Commercial Quality (CQ):
○ DX51D+Z, SGCC, ASTM CS Type A/B/C
● Forming Grades:
○ DX52D+Z, DX53D+Z (deep drawing), DX54D+Z (extra deep drawing)
● Structural Grades:
○ S250GD+Z, S280GD+Z, S350GD+Z, ASTM SS Grade 33–80
● High Strength Low Alloy (HSLA):
○ ASTM A653 SS Grade 50, EN S350GD+Z
● Special Coatings:
○ Galvalume (AZ), Galfan (Zn‑Al), ZAM (Zn‑Al‑Mg)
○ DX51D+Z, SGCC, ASTM CS Type A/B/C
● Forming Grades:
○ DX52D+Z, DX53D+Z (deep drawing), DX54D+Z (extra deep drawing)
● Structural Grades:
○ S250GD+Z, S280GD+Z, S350GD+Z, ASTM SS Grade 33–80
● High Strength Low Alloy (HSLA):
○ ASTM A653 SS Grade 50, EN S350GD+Z
● Special Coatings:
○ Galvalume (AZ), Galfan (Zn‑Al), ZAM (Zn‑Al‑Mg)
Typical Ranges– Base Steel:
● Carbon %: 0.02 – 0.20
● Manganese %: 0.20 – 1.60
● Silicon: ≤ 0.30
● Phosphorus %: ≤ 0.030
● Sulphur %: ≤ 0.030
● Aluminium %: 0.01 – 0.05 (for deoxidation)
Zinc or alloy coating mass applied on top, e.g., Z100–Z600 = 100–600 g/m² total coating weight.
● Carbon %: 0.02 – 0.20
● Manganese %: 0.20 – 1.60
● Silicon: ≤ 0.30
● Phosphorus %: ≤ 0.030
● Sulphur %: ≤ 0.030
● Aluminium %: 0.01 – 0.05 (for deoxidation)
Zinc or alloy coating mass applied on top, e.g., Z100–Z600 = 100–600 g/m² total coating weight.
● Coils / Sheets:
○ Thickness (mm): 0.25 – 3.0
○ Width (mm): 600 – 1500
○ Coil weight: 3 – 15 tons
● Plates (cut to length):
○ Thickness (mm): up to 6
○ Width (mm): up to 1500
○ Length (mm): 2000 – 6000
● Coating Mass:
○ Z100 – Z600 (100–600 g/m² total, both sides)
○ AZ150 (150 g/m² Al‑Zn alloy)
○ Thickness (mm): 0.25 – 3.0
○ Width (mm): 600 – 1500
○ Coil weight: 3 – 15 tons
● Plates (cut to length):
○ Thickness (mm): up to 6
○ Width (mm): up to 1500
○ Length (mm): 2000 – 6000
● Coating Mass:
○ Z100 – Z600 (100–600 g/m² total, both sides)
○ AZ150 (150 g/m² Al‑Zn alloy)
● Roofing & cladding sheets
● Corrugated panels
● HVAC ducts & appliances
● Automotive body panels & components
● Agricultural equipment & storage tanks
● General fabrication & industrial use
● Corrugated panels
● HVAC ducts & appliances
● Automotive body panels & components
● Agricultural equipment & storage tanks
● General fabrication & industrial use
● Coils:
○ Inner diameter: 508 mm or 610 mm
○ Packed with steel strapping, edge protectors, waterproof paper, and outer steel wrapping
○ Eye to sky or eye to side orientation depending on shipping method
● Sheets / Plates:
○ Bundled in lots of 1.5–3 tons, strapped with steel bands
○ Wooden pallets or dunnage for stacking and forklift handling
● Shipping:
○ Breakbulk for large coil lots
○ Containerized (20’ or 40’, max ~25 tons)
○ ISPM‑15 compliance for wooden dunnage
○ Inner diameter: 508 mm or 610 mm
○ Packed with steel strapping, edge protectors, waterproof paper, and outer steel wrapping
○ Eye to sky or eye to side orientation depending on shipping method
● Sheets / Plates:
○ Bundled in lots of 1.5–3 tons, strapped with steel bands
○ Wooden pallets or dunnage for stacking and forklift handling
● Shipping:
○ Breakbulk for large coil lots
○ Containerized (20’ or 40’, max ~25 tons)
○ ISPM‑15 compliance for wooden dunnage
